Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 just how to hook up to the Wi Fi Router or Control several light without router;

in order to connect the Atlantik V2.X to your property Wi Fi router you need to stick to the 11 actions.

1. Turn fully off all units.

2. Switch on just the first device you will link.

3. In your tablet pick the wifi-socket.

4. Open Chrome from your own tablet and kind 192.168.1.100 within the address club.

5. Username admin password 000000

6. Change mode to Sat.

7. Place your community password and SSID. ( Encryption constantly Disable : ( the system believe it is automaticly )

9. Head to system within the menu that is main and then click restart.

10. Head to wifi establishing once more and alter to your system router SSID.

omegle chatki

11. get the Orphek application and do search id, it will get the unit that is first.

Then do from 1 to 11 for the staying devices.

7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).

When you look at the SSID field you shall key in your community title. That is instance painful and sensitive so be sure to utilize capital or little letters so it really is proper. When you look at the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system think it is automaticly )

Select /Keep ,disable within the encryption field (don’t confuse with encryption key package). Your tablet will immediately get the encryption key if for example the router supports it.

9. Into the left that is upper of UART display screen you are going to a range of fundamental, Advanced, and System.

Select system TAB plus in the section that is first of page you will notice a restart key. Press the restart switch. a window look saying the web web browser cannot hook up to the internet protocol address. That is fine since you should have to connect with your router SSID.

10. In your tablet /Phone connect with your wi-fi Router network SSID.

The clear button on the upper right of the screen 11.Open the Orphek app and click. Now click on the search key situated on the left that is upper of display. Your community should get the tablet as well as your IP that is new address your Orphek light should appear.

Perform actions 1 to 11 when it comes to staying Orphek devices.

* choice : you are able to set the internet protocol address fixed , for better connection

You shall then go to:

A. Unchecked The Enable DHCP

B. Enter a static internet protocol address that belongs to your house router. As an example:

If the router is 100.168.20.1, you’ll be able to enter 100.168.20.2 or any internet protocol address between .2 and .254.

the IP address must be unique if not it shall cause a ip conflict

C. It’s also advisable to enter the submask as well as in many cases it really is 255.255.255.0.

D. Go into the Gateway Address : it ought to be your Router internet protocol address

E. Then perform some exact exact same towards the units that are remaining. BUT etch unit will need to have IP address that is unique .

example:

In case your House Router set:

ssid: house

password : 12345678

internet protocol address 192.168.100.1

submusk 255.255.255.0

then chances are you should set product 1

1.work type: Sta

2.SSID: home

3.Encryption Disable : ( the system think it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : IP: 192.168.100.10

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system when you look at the menu that is main and then click restart.

12. get the Orphek application and do search id, it must discover the unit that is first.

then you definitely should set unit 2 –

OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system believe it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100. 11

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system within the primary menu, and then click restart.

12. get the Orphek application and do search id, it will find device 2 .

Leave a Reply

Your email address will not be published. Required fields are marked *